Victron Energy SmartSolar MPPT Solar Charge Controller - 250V - 100Am- VE.CAN Port - SCC125110412 - CW91819

Victron Energy  SmartSolar MPPT Solar Charge Controller - 250V - 100Am- VE.CAN Port - SCC125110412 - CW91819

SmartSolar MPPT VE CAN 250V-100A with VE.CAN Port

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery banks.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.

MPPT: Ultra Fast Maximum Power Point Tracking

The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.

The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium, and others.

Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

Daisy Chain Additional Units

The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply "daisy-chained" to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.

SmartSolar Control Display

The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device.

• Ultra-Fast MPPT Technology: The MPPT VE.Can SmartSolar charger utilizes the latest and fastest technology to convert solar energy into optimal battery charging, ensuring maximum efficiency.

• Wide PV Array Compatibility: Connects to a PV array of 150 or 250 Volt Voc, automatically detecting and charging 12V, 24V, or 48V battery banks with current ranging from 70 to 100A, depending on the model.

• Programmable Charge Settings: Fully programmable charge settings for different battery chemistries, including lead-acid and lithium batteries, allowing customization to suit your specific needs.

• Remote Control & Monitoring: Easily control and configure the charger over Bluetooth via the VictronConnect App, providing real-time data on battery voltage, current, PV voltage, current, and historical data.

Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.