Description
- Description
- Features
- Specification
- Package Include
- Product Manual
- Delivery
Alien Hydroponics 16 Pot (2 Row) V-System RDWC
Welcome to the future of hydroponics. The powerful V-SYSTEM™ has been designed to help you grow trees with brand-new technology never seen before in the industry. Years have been spent developing this highly oxygenated RDWC system that will give you the healthiest root zones and massive yields.
In an industry first, the V-SYSTEM™ doesn’t use an air pump to oxygenate the nutrient solution. Instead, using precision design, the water flow creates a whirlpool that oxygenates the fluid content of the entire pot, rather than just the area around the air source. No matter where your roots are growing in the pot, they will receive the highest oxygen levels to grow exceptional crops.
The nutrient solution is further oxygenated using venturi valve technology to draw air into the pot. Simple yet effective.
The massive 15 Gallon / 58ltr V-SYSTEM™ pots can hold giant root zones allowing for huge plants and the highest yields. Expertly designed, the sloped shape of the pot also enables you to drain the entire system so you’ll only grow in the freshest water.
Unlike other hydroponics systems, the V-SYSTEM’s™ JET-STREAM® Vortex water pump is located outside the header pot, so less heat is transferred to the fluid. Cooler water temps mean less chance of root rot and other pathogens affecting your crop.
-
15 Gallon (58L) V-Pot: Large capacity pots for substantial root growth.
-
Water Fill Line: Easy monitoring of water levels.
-
Total-Drainage Bases: Ensure the freshest water for plant growth.
-
Venturi Injectors: Efficient oxygenation without an air pump.
-
Inspection Covers: Easy access for system maintenance.
-
5" Spiral Tubing: Customizable length for flexible setup.
-
5" Dual-Flow™ Fittings: Enhanced nutrient flow and distribution.
-
Integrated Filtration: Keeps nutrient solution clean and free of debris.
-
T304 Stainless Clamps: Durable and rust-resistant.
-
Heavy-Duty Components: Built to last and withstand rigorous use.
-
Push-Fit Feed Connections: Simplifies setup and maintenance.
-
JET-STREAM® Vortex™ Pump: Ensures optimal water flow and oxygenation.
Number of pots | 16 |
---|---|
Number of rows | 2 |
Kit total fluid volume | 262.6 gallons (994 fl oz) |
Length | 15' 10.9" (190.9 inches / 4850 mm) |
Width | 3 11.2" (47.2 inches / 1200 mm) |
Model | V-SYSTEM Vortex Water Pump 1100W 120V 17700 l/h |
Wattage | 1100 watts |
Flow Rate | 4676 gal/hr (17700 L/hr) |
Recommended water chiller minimum capacity | 396 gallons (1500 L) |
-
1x V-SYSTEM Vortex Water Pump 1100W 120V 17700 l/h
-
16x V-Pot 58L
-
16x V-Pot Base
-
16x V-Pot Lid
-
16x V-Pot Lid Inspection Cover
-
16x Square Net Pot
-
16x V-Pot Clip
-
16x Air Filter for V-SYSTEM Venturi, 6mm
-
16x Silencer for Venturi
-
16x Venturi Fitting
-
16x Venturi Air Inlet Pipe 6mm Blue (2X 4")
-
7x Nut 5"
-
17x Washer 5" Green Silicone
-
38x 5" Stainless Steel Clamp
-
1x Distribution Tee 50mm
-
2x DM Push-Fit Elbow 28mm V-SYSTEM
-
16x DM Push-Fit Tee 28-15mm V-SYSTEM
-
1x 1/2" Drain Cap Fitting
-
1x Drain Tap 1/2"-16mm Barb
-
2x Elbow 5" Barbed with Drain Point
-
3x Elbow 5" Threaded Dual-Flow
-
1x Filter Manifold Complete 50mm-1.5"
-
1x Float Valve
-
1x V-SYSTEM Header Pot 20L 40mm
-
1x Silver Lid
-
1x Header Pot Blank
-
1x Hosetail 16mm-3/4" Female Green
-
16x Venturi Inlet Fitting for 28mm Pipe
-
16x Pipe 28mm White Rigid 1 Meter - Venturi Feed
-
1x Pipe 32mm Red 1 Meter Spiral
-
1x Pipe 40mm Silver 1 Meter Spiral
-
2x Pipe 50mm Silver 1 Meter
-
17x Pipe 5" Silver Spiral 80cm
-
1x Tee 5" Barbed
-
14x Tee Threaded 5" Dual-Flow
-
2x Threaded Tank Connector 1"
-
1x Vortex Pump Inlet Manifold 40mm Short
-
2x 1" Cap for Chiller Connections
-
1x Tank Connector Straight 32mm
-
1x Tank Connector Straight 40mm
-
1x Elbow 50mm Barbed
-
1x Terminal Manifold Left 50mm
-
1x Terminal Manifold Right 50mm
-
40x 28mm Insert for 28mm Rigid Pipe
-
2x 28mm Push-Fit Stop End
-
2x Clamp Size 2
-
2x Clamp Size 3
-
8x Clamp Size 4
-
1x 8mm Screwdriver for 5" Clamp
-
1x Wrench 5"
-
1x Wrench for Float Valve
-
1x 8mm Socket for 5" Clamp
-
1x Pipe Cutter 50mm
-
4x Silicone Grease - Food Grade
Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.